Nā Kūlana Kūlana Kūlana no nā Mea Hana Mana

Hāʻawi nui ʻia nā mea hoʻolako mana o ka honua ma Kina, Iapana, ʻAmelika Hui Pū ʻIa, Kelemānia, Italia a me nā ʻāina ʻē aʻe, a ʻo nā mākeke mea kūʻai nui i hoʻopaʻa ʻia ma ʻAmelika ʻAmelika, ʻEulopa a me nā wahi ʻē aʻe.

ʻO ka nui o nā mea hana mana o kā mākou ʻāina ma ʻEulopa a me ʻAmelika ʻĀkau. ʻO nā ʻāina nui a i ʻole nā ​​ʻāina ʻo ʻAmelika Hui Pū ʻIa, Kelemānia, United Kingdom, Belgium, Netherlands, Farani, Iapana, Kanada, Australia, Hong Kong, Italia, United Arab Emirates, Sepania, Finland, Polani, Austria, Turkey, Denmark. , Thailand, Indonesia, etc.

ʻO nā mea hana mana kaulana i lawe ʻia i waho, ʻo ia nō: nā ʻike hopena, nā hammer uwila, nā ʻili band, nā ʻili pōʻai, nā ʻili pānaʻi, nā screwdrivers uila, nā ʻili kaulahao, nā wili kihi, nā pū nail air, etc.

1

ʻO nā kūlana honua no ka nānā ʻana i nā mea hana mana e pili ana i ka palekana, electromagnetic compatibility, ana a me nā ʻano hoʻāʻo, nā lako a me nā mea hana hana e like me nā ʻano maʻamau.

ʻO ka hapa nuiNā Kūlana Palekana maʻamauHoʻohana ʻia i nā Nānā Mea Hana Mana

-ANSI B175- E pili ana kēia pūʻulu maʻamau i nā lako mana lima lima o waho, e like me nā mea ʻoki mauʻu, nā mea puhi, nā ʻokiʻoki a me nā ʻili kaulahao.

-ANSI B165.1-2013—— Pili kēia kūlana palekana US i nā mea palaki mana.

-ISO 11148—E pili ana kēia maʻamau honua i nā mea hana lima ʻole e like me ka ʻoki ʻana a me ka ʻoki ʻana i nā mea hana mana, nā drills a me nā mīkini paʻi, nā mea hana mana hopena, nā mea wili, nā sanders a me nā polishers, nā ʻoki, nā ʻāpana a me nā mea hana mana kōmi.

IEC/EN--Loaʻa ka mākeke honua?

IEC 62841 Hoʻohana ʻia i ka mana paʻa lima, nā mea lawe lima a me nā mīkini māla

Pili i ka palekana o ka uila, kaʻa kaʻa a i ʻole nā ​​mea hoʻokele magnetic a hoʻoponopono: nā mea paʻa lima, nā mea lawe lima a me nā mīkini mauʻu a me nā māla.

IEC61029 nā mea hana mana hiki ke wehe

Nā koi no ka nānā ʻana i nā mea uila uila kūpono no ka hoʻohana ʻana i loko a me waho, e like me nā ʻili pōʻai, nā ʻili lima radial, nā mea hoʻolālā a me nā mea hoʻolālā mānoanoa, nā mea wili pahu, nā ʻili band, nā mea ʻoki bevel, nā wili daimana me ka lako wai, nā wili daimana me ka wai. 12 mau ʻāpana liʻiliʻi o nā huahana e like me nā ʻili a me nā mīkini ʻoki profile.

IEC 61029-1 Ka palekana o nā mea uila e hoʻohana ʻia i ka kaʻa - Māhele 1: Nā koi maʻamau

Ka palekana o nā mea hana mana lawe lima Māhele 1: Nā koi maʻamau

IEC 61029-2-1 Ka palekana o nā mea uila i hoʻohana ʻia i nā kaʻa uila - Māhele 2: Nā koi kūikawā no nā saws circular

IEC 61029-2-2 Ka palekana o nā mea uila i hoʻohana ʻia i nā kaʻa uila - Māhele 2: Nā koi kūikawā no nā ʻoki lima radial

IEC 61029-2-3 Ka palekana o nā mea uila e hoʻohana ʻia i nā kaʻa uila - Māhele 2: Nā koi kūikawā no nā mea hoʻolālā a me nā mānoanoa

IEC 61029-2-4 Ka palekana o nā mea uila e hoʻohana ʻia i nā kaʻa uila - Māhele 2: Nā koi kūikawā no nā mea wili pahu

IEC 61029-2-5 (1993-03) Ka palekana o nā mea hana uila e hoʻohana ʻia i nā kaʻa uila - Māhele 2: Nā koi kūikawā no nā ʻili hui.

IEC 61029-2-6 Ka palekana o nā mea hana uila e hoʻohana ʻia i ka kaʻa - Māhele 2: Nā koi kūikawā no nā drill daimana me ka lako wai.

IEC 61029-2-7 ka nui o nā mea hana uila e hoʻokele ʻia i ka kaʻa - Māhele 2: Nā koi kūikawā no nā ʻili daimana me ka lako wai.

IEC 61029-2-9 ka palekana o nā mea uila e hoʻohana ʻia i nā kaʻa uila - Māhele 2: Nā koi kūikawā no nā saws miter

IEC 61029-2-11 ka nui o nā mea hana uila i hoʻohana ʻia i ka kaʻa - Māhele 2-11: Nā koi kūikawā no nā ʻike miter-bench.

IEC/EN 60745mea hana lima lima

E pili ana i ka palekana o ka uila uila a i ʻole nā ​​​​mea hana mana magnetically, ʻaʻole ʻoi aku ka nui o ka volta helu o nā mea hana hoʻokahi-phase AC a i ʻole DC ma mua o 250v, a ʻaʻole i oi aku ka volta helu o nā mea hana AC ʻekolu-phase ma mua o 440v. Hoʻopuka kēia maʻamau i nā pōʻino maʻamau o nā mea hana lima i ʻike ʻia e nā poʻe āpau i ka wā hoʻohana maʻamau a me ka hoʻohana hewa ʻana i nā mea hana.

Ua hoʻolaha ʻia he 22 mau kūlana i kēia manawa, ʻo ia hoʻi nā wili uila, nā hoʻoheheʻe hopena, nā hāmare uila, nā wrenches impact, screwdrivers, grinders, polishers, disc sanders, polishers, circular saws, scissors electric, electric punching shears, and planers electric. , Mīkini paʻi, ʻike pānaʻi, vibrator paʻa, pū puhi uwila wai ʻole, ʻike kaulahao uila, mīkini kui uila, wili bakelite a me ka ʻoki uila, mīkini ʻoki uila a me ka ʻoki mauʻu uila, mīkini ʻoki pōhaku uila, nā mīkini strapping, tenoning nā mīkini, nā ʻili band, nā mīkini hoʻomaʻemaʻe paipu, nā koi palekana kūikawā no nā huahana mea hana lima.

2

TS EN 60745-2-1 Nā mea hana uila i hoʻohana ʻia i nā kaʻa paʻa lima - Palekana - Māhele 2-1: Nā koi kūikawā no nā drills a me nā hoʻoheheʻe hopena

TS EN 60745-2-2 Nā mea hana uila paʻa lima - Palekana - Māhele 2-2: Nā koi kūikawā no nā screwdrivers a me nā wrenches hopena

TS EN 60745-2-3 Nā mea hana uila i hoʻohana ʻia i ka kaʻa - Palekana - Māhele 2-3: Nā koi kūikawā no nā mea wili, polishers a me nā sanders-type disk

TS EN 60745-2-4 Nā mea hana uila paʻa lima - Palekana - Māhele 2-4: Nā koi kūikawā no nā sanders a me nā polishers ma waho o ke ʻano disk

TS EN 60745-2-5 Nā mea hana uila i hoʻopaʻa ʻia i ka kaʻa - Palekana - Māhele 2-5: Nā koi kūikawā no nā saws circular

TS EN 60745-2-6 Nā mea hana uila paʻa lima - Palekana - Māhele 2-6: Nā koi kūikawā no nā hama.

60745-2-7 Ka palekana o nā mea hana uila i hoʻohana ʻia i ka mīkini lima.

TS EN 60745-2-8 Nā mea hana uila i hoʻohana ʻia i nā kaʻa paʻa lima - Palekana - Māhele 2-8: Nā koi kūikawā no nā ʻū a me nā nibblers

TS EN 60745-2-9 Nā mea hana uila paʻa lima - Palekana - Māhele 2-9: ʻO nā koi kūikawā no nā tappers

60745-2-11 Nā mea hana uila i hoʻohana ʻia i ka mīkini paʻa lima - Palekana - Māhele 2-11: Nā koi kūikawā no ka reciprocating saws (jig a me saber saws)

TS EN 60745-2-13 Nā mea hana uila paʻa lima - Palekana - Māhele 2-13: Nā koi kūikawā no nā ʻili kaulahao

TS EN 60745-2-14 Nā mea hana uila paʻa lima - Palekana - Māhele 2-14: Nā koi kūikawā no nā mea hoʻolālā.

TS EN 60745-2-15 Nā mea hana uila i hoʻohana ʻia i nā kaʻa paʻa lima - Palekana ʻāpana 2-15: Nā koi kūikawā no nā mea ʻoki pa.

TS EN 60745-2-16 Nā mea hana uila paʻa lima - Palekana - Māhele 2-16: Nā koi kūikawā no nā tacker

TS EN 60745-2-17 Nā mea hana uila paʻa lima - Palekana - Māhele 2-17: Nā koi kūikawā no nā mea ala a me nā trimmer.

TS EN 60745-2-19 Nā mea hana uila paʻa lima - Palekana - Māhele 2-19: Nā koi kūikawā no nā mea hui.

TS EN 60745-2-20 Nā mea hana uila i hoʻohana ʻia i nā kaʻa paʻa lima - Palekana ʻāpana 2-20: Nā koi kūikawā no nā ʻili hui.

TS EN 60745-2-22 Nā mea hana uila i hoʻohana ʻia i ka mīkini paʻa lima - Palekana - Māhele 2-22: Nā koi kūikawā no nā mīkini ʻokiʻoki.

Nā kūlana hoʻokuʻu aku no nā mea hana mana German

Hoʻokumu ʻia nā kūlana aupuni a me ka hui ʻana no nā mea hana mana e ka German Institute for Standardization (DIN) a me ka Association of German Electrical Engineers (VDE). ʻO nā maʻamau o nā mea hana mana i hoʻonohonoho kūʻokoʻa, ʻae ʻia a mālama ʻia paha:

3

· E hoʻololi i ka IEC61029-2-10 a me IEC61029-2-11 a CENELEC i hoʻololi ʻole ʻia i DIN IEC61029-2-10 a me DIN IEC61029-2-11.

· Loaʻa i nā kūlana hoʻohālikelike electromagnetic VDE0875 Part14, VDE0875 Part14-2, a me DIN VDE0838 Part2: 1996.

· Ma 1992, ua hoʻokumu ʻia ka DIN45635-21 moʻo no ke ana ʻana i ka leo ea i hoʻopuka ʻia e nā mea hana mana. He 8 mau maʻamau i ka huina, me nā ʻāpana liʻiliʻi e like me nā ʻili pānaʻi, nā ʻili pōʻai uila, nā mea hoʻolālā uila, nā ʻōkuhi hopena, nā wrenches hopena, nā hāmare uila, a me nā mold luna. Nā ʻano ana o ka walaʻau huahana.

Mai ka makahiki 1975, ua hoʻokumu ʻia nā maʻamau no nā mea pili o nā mea hana mana a me nā kūlana no nā mea hana hana.

DIN42995 ʻO ke kumu maʻalahi - ka pahu hoʻokele, nā ʻāpana pili

DIN44704 mea hana mana

DIN44706 Angle grinder, spindle pili a me ka uhi uhi pili ana ana

ʻO DIN44709 ʻO ka uhi pale pale ʻoki ʻoki kūpono kūpono no ka wili ʻana i ka wikiwiki laina laina ʻaʻole iʻoi aku ma mua o 8m/S

DIN44715 ka nui o ka ʻāʻī drill uila

DIN69120 Nā huila wili like no nā huila wili lima

DIN69143 kīʻaha wili huila no ka lima-paʻa kihi wili

DIN69143 huila wili ʻano Cymbal no ka wili ʻana i ka mīkini ʻoki lima paʻa.

DIN69161 Nā huila ʻoki ʻokiʻoki ʻokiʻoki no nā mea wili kihi lima

E hoʻokuʻu aku i nā kūlana mea hana mana Pelekane

Hoʻokumu ʻia nā kūlana aupuni Pelekane e ka British Royal Chartered British Standards Institution (BSI). ʻO nā maʻamau i kūkulu kūʻokoʻa, ʻae ʻia a mālama ʻia paha:

Ma waho aʻe o ka hoʻokomo pololei ʻana i nā pūʻulu ʻelua o nā maʻamau BS EN60745 a me BS BN50144 i hoʻokumu ʻia e EN60745 a me EN50144, ʻo nā ʻōnaehana palekana no nā mea hana lima paʻa e mālama i ka moʻo BS2769 i kūkulu ʻia a hoʻohui i kahi "Second Safety Standard for Hand- paʻa i nā mea hana mana "Mahele: Nā Koina Kūikawā no ka Milling Profile", kēia pūʻulu o nā kūlana kūpono like me BS EN60745 a me BS EN50144.

'ē aʻehōʻike ʻike

Pono e hoʻololi i ka volta a me ka pinepine o nā huahana mea hana mana i lawe ʻia i ka pae uila a me ka alapine o ka ʻoihana haʻahaʻa haʻahaʻa haʻahaʻa o ka ʻāina lawe mai. ʻO ka pae uila o ka ʻōnaehana hoʻoili haʻahaʻa haʻahaʻa ma ka ʻāina ʻEulopa. Hoʻohana ʻia nā lako uila no ka hale a me nā mea like e kahi ʻōnaehana AC 400V/230V. , ʻo 50HZ ka alapine; Loaʻa iā ʻAmelika ʻĀkau kahi ʻōnaehana AC 190V / 110V, ʻo ke alapine he 60HZ; Aia ʻo Iapana i AC 170V/100V, ʻo ke alapine he 50HZ.

Volta i helu ʻia a me ka alapine helu No nā huahana mea hana mana like ʻole i alakaʻi ʻia e nā motika moʻo hoʻokahi-phase, nā hoʻololi i ka waiwai helu helu helu hoʻokomo e hoʻololi i ka māmā holo kaʻa a pēlā nā ʻāpana hana hana; no ka poʻe i alakaʻi ʻia e nā motika asynchronous ʻekolu-phase a i ʻole hoʻokahi manawa.

ʻO ka nui kaulike ʻole o ke kino kaʻawili o kahi mea hana mana e hoʻopuka ai i ka haʻalulu a me ka walaʻau i ka wā e hana ai. Mai kahi hiʻohiʻona palekana, he mea pōʻino ka walaʻau a me ka haʻalulu i ke olakino a me ka palekana o ke kanaka a pono e kaupalena ʻia. Hoʻoholo kēia mau ʻano hoʻāʻo i ka pae o ka vibration i hana ʻia e nā mea hana mana e like me nā drills a me nā wrenches hopena. Hōʻike nā pae haʻalulu ma waho o nā ʻae i koi ʻia i ka hana hewa ʻana o ka huahana a hiki ke hoʻopilikia i nā mea kūʻai.

ISO 8662/EN 28862Ana haʻalulu o nā lima lima paʻa lima lima

ISO/TS 21108—E pili ana kēia maʻamau honua i nā ana a me nā ʻae ʻana o nā loulou socket no nā mea hana lima lima.


Ka manawa hoʻouna: Nov-16-2023

Noi i ka hoike laana

E waiho i kāu palapala noi no ka loaʻa ʻana o kahi hōʻike.