Woven garment inspection
Clothing styling inspection:
Whether the collar shape is flat, the sleeves, the collar, and the collar should be smooth, the lines should be clear, and the left and right sides should be symmetrical;
Fabric appearance, yarn running, color difference, roving, fabric quality, and damage.
Clothing quality inspection symmetry inspection:
Clothing collars, sleeves, and arm bones should be aligned;
The height of the front pocket, the size distance, the size of the collar tip, the front, rear, left and right barge positions, and whether the contrasting colors are relative;
Whether the width of the two arms and the two clamping circles are the same, the length of the two sleeves, and the size of the cuffs.
Clothing quality inspection and workmanship inspection:
The threads in each part should be smooth and firm. There should be no jumpers, broken threads, floating threads, and splicing threads. There should not be too many threads and they should not appear in conspicuous parts. The stitch length should not be too sparse or too dense, and the bottom thread should be tight and tight;
Sewing gestures and eating postures should be even to avoid tightness and wrinkles;
Attention parts: collar, barrel surface, clip ring, mountain strips, pockets, feet, cuffs;
The placket should be straight, the left and right hems should be the same length, the round ones should be smooth without wrinkles, the square ones should be square, and the left and right collar gaps should be the same;
The front placket zipper should be evenly spaced and have appropriate tightness to avoid wavy, be careful of the front and center falling, the width of the zipper should be symmetrical on the left and right, and be careful about the splayed hem of the shirt;
Shoulder seams, sleeve peaks, collar ring, and posture should be appropriate. The collar cotton should be naturally flat, and after the collar is turned over, it should be tight and tight without exposing the bottom;
The bag cover should match the front body. The fabric inside the bag cover should be of appropriate tightness and should not be buckled. There should be no missing stitches or skipped stitches in the bag. The bag should be firm and clean, and the seal should have no holes;
The lining of the shirt should not be exposed, and the cotton should not be exposed. Whether the lining has enough margin, whether it is cracked, whether the stitching is too thin, whether the fabric of each part is consistent and flat, and there is no tightness Phenomenon.
The Velcro must not be misaligned, and the heavy lines, missing lines, and upper and lower sizes must be consistent;
The positioning of the phoenix eye should be accurate, the incision should be clean and hairless, the needle button thread should not be too tight or too loose, and the button should be punched in place with appropriate tightness;
The thickness and location of the dates must meet the design requirements, and no trailers are allowed;
The entire woolen fabric should be consistent in both forward and reverse directions.
Dimensional inspection:
Strictly carry out dimensional measurements in accordance with the size chart required for order making.
Clothing inspection and stain inspection
All parts should be worn flat, without yellowing, aurora, water stains or discoloration;
Keep all parts clean, free of dirt and hair;
Excellent effect, soft hand feel, no yellow spots or water stains.
Knitted garment inspection
Appearance inspection:
Thick and thin yarn, color difference, stains, yarn running, damage, snakes, dark horizontal lines, fuzz, and feel;
The collar should be flat and the collar should be round and smooth;
Fabric quality inspection: shrinkage, color loss, flat collar, ribbed frame, color and texture.
Dimensional inspection:
Strictly follow the size chart.
shirt
The size of the collar tip and whether the collar bones are relative;
The width of the two arms and the two clamping circles;
The length of the sleeves and the width of the cuffs;
The sides are long and short, and the feet are long and short.
pants
The length, width and width of trouser legs, and the width and width of trouser legs
The height of the left and right pockets, the size of the bag mouth, and the length of the left and right sides of the back pocket
Workmanship inspection:
shirt
The lines in each part should be straight, neat and firm, with appropriate tightness. No floating, broken or skipped threads are allowed. There should not be too many threads and they should not appear in conspicuous positions. The stitch length should not be too sparse or too dense;
The gestures of raising the collar and burying the collar should be uniform to avoid too much space in the collar and collar;
Common defects of lapel models: the collar is skewed, the bottom of the collar is exposed, the collar edge is yarny, the collar is uneven, the collar is high or low, and the collar tip is large or small;
Common defects in round necks: the collar is skewed, the collar is wavy, and the collar bones are exposed;
The top of the clamp should be straight and without corners;
The mouth of the bag should be straight and the stop of the bag should be clean and cut.
The excess ends on the four legs must be trimmed off
There should be no horns on both sides of the shirt legs, and the forks should not be raised or lowered;
The strips should not be uneven in thickness, nor should they be too many or too tight, causing the clothes to be bunched up;
Hasso should not have too many stitches, and pay attention to clearing the ends of the threads;
The bottom line should be tight and tight, and all bones should not be wrinkled, especially the collar, collar, and foot circumference.
The positioning of the button door must be accurate, the incision must be clean and hair-free, the button door line must be smooth and without loose edges, and must not bulge, the buttoning position must be accurate, and the button line must not be too loose or too long.
pants
Be careful not to skew the workmanship of the back bag, and the mouth of the bag should be straight;
The western line of the trousers must be parallel and must not be bent or unevenly wide;
The parts should be ironed and put on flat, without yellowing, laser, water stains, dirt, etc.;
Threads should be cut thoroughly.
Denim inspection
Style check
The shape of the shirt has bright lines, the collar is flat, the lap and collar are round and smooth, the bottom edge of the toe is straight, the trousers have smooth lines, the trouser legs are straight, and the front and back waves are smooth and straight.
Roving, running yarn, damage, dark horizontal color difference, washing marks, uneven washing, white and yellow spots, and stains.
Symmetry test
shirt
The size of the left and right collars, the collar, the ribs, and the sleeves should be aligned;
The length of the two sleeves, the size of the two sleeves, the length of the sleeve fork, and the width of the sleeve;
Bag cover, bag mouth size, height, distance, bone height, left and right bone breaking positions;
The length of the fly and the degree of swing;
The width of the two arms and the two clamps
pants
The length, width and width of the two trouser legs, the size of the toes, the waistband should be three pairs, and the side bones should be four years old;
The size of the front, back, left and right and the height of the spleen bag;
Ear position and length;
Sweater inspection
Appearance inspection
Thick and young hair, flying hair, lint balls, snakes, uneven color of mixed hair, missing stitches, loose and not strong shirt body, insufficient softness in washing water, white marks (uneven dyeing), and stains.
Dimensional inspection:
Strictly follow the size chart.
Symmetry test:
The size of the collar tip and whether the collar bones are relative;
The width of both arms and legs;
The length of the sleeves and the width of the cuffs
Common defects of lapel models: the neckline is yarny, the hollow of the collar is too wide, the placket is twisted and skewed, and the bottom tube is exposed;
Common defects of bottle collar models: the neckline is too loose and flares, and the neckline is too tight;
Common defects in other styles: the corners of the top of the shirt are raised, the legs of the shirt are too tight, the stitched strips are too straight, the legs of the shirt are wavy, and the side bones on both sides are not straight.
Ironing inspection:
All parts should be ironed and worn flat, without yellowing, water stains, stains, etc.;
No board clumping, thread ends must be completely removed.
shirt inspection
Appearance inspection:
Roving, running yarn, flying yarn, dark horizontal lines, white marks, damage, color difference, stains
Dimensional inspection:
Strictly follow the size chart.
Symmetry test:
The size of the collar tip and whether the collar bones are relative;
The width of the two arms and the two clamping circles;
The length of the sleeves, the width of the cuffs, the distance between the sleeve pleats, the length of the sleeve forks, and the height of the sleeves;
The height of both sides of the pole;
Pocket size, height;
The placket is long and short, and the left and right strips are symmetrical.
Workmanship inspection:
The lines in each part should be straight and tight, and there should be no floating threads, skipped threads, or broken threads. There should not be too many splices and they should not appear in conspicuous positions. The stitch length should not be too sparse or too dense, in accordance with the regulations;
The collar tip should be close to the collar, the collar surface should not be bulging, the collar tip should not be broken, and the mouth should be stopped without regurgitation. Pay attention to whether the bottom line of the collar is exposed, the seam should be neat, the collar surface should be tight and not curled up, and the bottom of the collar should not be exposed;
The placket should be straight and flat, the side seams should be straight, the elasticity should be appropriate, and the width should be consistent;
The inner stop of the open bag should be cut cleanly, the bag mouth should be straight, the bag corners should be rounded, and the seal should be consistent in size and firm;
The hem of the shirt should not be twisted and turned outwards, the right-angled hem should be straight, and the round bottom hem should have the same angle;
The upper and lower threads should be appropriately tight to avoid wrinkling (parts prone to wrinkling include collar edges, plackets, clip rings, sleeve bottoms, side bones, sleeve forks, etc.);
The upper collar and embedded clips should be arranged evenly to avoid too much space (the main parts are: collar nest, cuffs, clip rings, etc.);
The positioning of the button door should be accurate, the cut should be clean and hairless, the size should match the button, the button position should be accurate "especially the collar tip", and the button line should not be too loose or too long;
The thickness, length and position of the jujubes must meet the requirements;
The main parts of matching strips and grids: the left and right panels are opposite to the placket, the bag piece is opposite to the shirt piece, the front and back panels are opposite, the left and right collar tips, sleeve pieces, and sleeve forks are opposite;
Front and reverse rough surfaces of all parts should be consistent in the same direction.
The clothes are ironed and flat, without yellowing, defects, water stains, dirt, etc.;
Important parts for ironing: collar, sleeves, placket;
Threads should be completely removed;
Pay attention to Pak penetrating glue.
Post time: Nov-23-2023