Product:
1.Must be without any unsafe defect for using;
2.Should be free of damaged, broken, scratch, crackle etc. Cosmetic / Aesthetics defect;
3. Must be conform to the shipping market legal regulation / client’s requirement;
4.The construction, appearance, cosmetics and material of all units should comply with client’s requirement / approved samples;
5.All units should have full function complying with client’s requirement / approved samples;
6.The marking / label on unit should be legal and clear.
Package
1.All units will be adequately packaged, and constructed from suitably robust materials, such that it arrives in store in a merchantable condition;
2.The packaging material can protect the goods from damage during transportation;
3.The shipping mark, bar code, label (such as price label), should conform to client’s spec.and/or approved samples;
4.The package should comply to client’s requirement / approved samples;
5.Text of illustration, instruction, label and warning statement etc. must be clearly printed in user’s language;
6.The illustration and instruction on the packaging must conform to the product and its actual performance.
7.The method and material of pallet/crate etc. should be approved by client.
Defect Description
Remark and then fail or pending
DEFECT DESCRIPTION
|
Critcal
|
Major
|
Minor
|
1. Shipment Packaging | |||
Bumped shipping cartons |
Remark and then fail or pending |
||
Damaged/Wet/Crushed/Deformed shipping carton | |||
Shipping carton cannot meet client requirement, such as corrugates perlinear foot,bursting seal required or not | |||
Shipping mark cannot meet requirement | |||
Too soft corrugated cardboard | |||
Non-compliance in retail package (e.g.. Wrong assortment, etc.) | |||
Wrong connection method of carton construction, glued or stapled | |||
2. Selling Packaging | |||
Poor workmanship of clamshell/display box hanging hole |
* |
* |
|
Wobbling of clamshell/display box (for free standing clamshell/display box) |
* |
* |
|
3. Labeling, Marking, Printing (Selling Packaging and Product) | |||
Wrinkle of Color card in clamshell/display box |
* |
* |
|
4. Material | |||
4.1 Glass | |||
Sharp point/edge |
* |
||
Bubble |
* |
* |
|
Chipped mark |
* |
* |
|
Flow mark |
* |
* |
|
Embedded mark |
* |
||
Broken |
* |
||
4.2 Plastic | |||
Color |
* |
||
Deformation, warpage, |
* |
||
Gate flash or flash at pull pin/push pin |
* |
* |
|
Short shot |
* |
* |
|
4.3 Metal | |||
Flash, burr mark |
* |
* |
|
Improper edge folding cause to sharp edge exposed |
* |
||
Abrasion mark |
* |
* |
|
Crack/Broken |
* |
||
Deformation, dent, bump |
* |
* |
|
5. Appearance | |||
Uneven / Asymmetric / Deformed / Non-compliance shape |
* |
||
Black shadow |
* |
* |
|
Poor plating |
* |
* |
|
Poor soldering on contact |
* |
* |
|
6. Function | |||
Dead unit |
* |
||
Obviously glinting |
* |
On-site Test
1. Hi-pot Test
2. Lamp parameter check
3. Product Dimension and Weight Measurement ( Perform if information is given)
4. Running test
5. Bar Code Verification (Against to every barcode carried body)
6. Carton Quantity and Assortment Checking
7. Carton Quantity and Assortment Checking
8. Carton Drop Test
Post time: Oct-18-2023