Ukuhlolwa kwezinto zokubhala, ngikholwa ukuthi uzohlangana nakho. Ngikholwa ukuthi ophathina abaningi bake bahlola amapeni ejeli, amapeni, ama-refills, ama-staplers nezinye izinto zokubhala. Namuhla, ngingathanda ukwabelana nawe ngesipiliyoni esilula sokuhlola.
Amapeni ejeli, amapeni okukhomba ibhola kanye nokugcwaliswa kabusha
A. Ama-nibs amapeni ejeli ahlukaniswe abe izinhlobo ezinhlanu: ultra-fine, extra-fine, mncane, medium and thick, njengoba kukhonjisiwe kuthebula elingezansi:
B. Kunezinhlobo ezine zokugcwalisa ezinikeza idatha yomumo nosayizi: J, K, L, kanye no-G2 (bheka Umfanekiso 1 kuya ku-2 kanye neThebula 2 kanye no-3), ezihlukile ku-J, K, L, kanye no-G2 njengo-N. izinhlobo.
C.Izimo zokusetha umhloli wokubhala:
(1) I-engeli yokubhala: 50-70°, khetha i-engeli yokubhala enezitishi ezihlangene kakhulu;
(2) Isivinini sokubhala: (4.5±0.5)m/min, okungukuthi (7.5±0.8)cm/s;
(3) Ifomethi yokubhala: imigqa egobile eqhubekayo enezikhala ezingu-2mm ukuya ku-5mm (ubude besekelo bu-10cm)
Izidingo zokuhlola D.
(1)Ingabhala kahle phakathi kuka-10cm. Ubude bokubhala bemininingwane ehlukene yama-nibs buboniswa kuThebula 4. Akufanele kube khona imigqa ephukile esobala kanye nezinguquko zokuminyana ekuqaleni nasekupheleni kwemithungo.
(2) Ukungeneka: Isampula lephepha lifakwa endaweni yokuhlola amahora angama-24, futhi akukho mkhondo osobala ngemuva kwephepha ngokuhlola okubonakalayo.
(3) Ukoma: Dweba umugqa oqondile ephepheni lokuhlola ngokuvumelana nomthwalo wokubhala oshiwo ngenhla, i-engeli, nesivinini. Ngemva kwemizuzwana engu-20, sula umugqa oqondile ngerabha uqonde phezulu. Imithungo kufanele ingabi namabala.
(4) Ukukhiqiza kabusha: Kopisha isampula yephepha ngomshini wokukopisha, futhi imigqa yokukopisha ihlala ibonakala.
(5) Ukumelana namanzi: Ngemva kokuba iphepha lesampula libekwe endaweni yokuhlola amahora angu-2, licwiliswa emanzini a-distilled noma ahlanjululwe ngehora le-1, futhi izithungo zihlala zibonakala ngemva kokumiswa. Le nto uyazikhethela futhi isebenza kumapeni ejeli kanye nokugcwalisa kabusha okubhalwe ukuthi “Water Resistant” (WR).
(6) Ukushesha okukhanyayo: Veza isampula lesampula kanye nesampula elijwayelekile loboya obuhlaza okwesibhakabhaka (elimbozwe kancane) ngaphansi kwemitha elifiphalayo noma isibani se-xenon kuze kube yilapho umehluko wombala phakathi kwesampula elijwayelekile elinguNombolo 3 loboya obuhlaza okwesibhakabhaka elidaluliwe nelingaveziwe lifinyelela izinga 4 lesampula elimpunga. ikhadi, ukulandelelwa komugqa kuhlala kubonakala.
(7) Ukubhala ngezikhathi ezithile: Ngemva kokuba ipeni lokuhlola elingasetshenzisiwe (ngaphandle kwesivalo sepeni) seliphumile emanzini ngokujwayelekile, ngemva kokulibeka livundlile amahora angu-24 ngaphansi kwezimo zemvelo yokuhlola, dweba umugqa oqondile ngesandla, bese ubhala umugqa oqhubekayo ngaphakathi. 10cm.
(8) Ukulondolozeka: amapeni okuhlola asanda kukhiqizwa, angasetshenzisiwe (anezikepisi zosiba) abekwe avundlile ezingeni lokushisa (40±2)°C kanye nomswakama ohlobene ongu-(55±5)% izinsuku ezingu-90, futhi ahlolelwa ukubhala ukusebenza nokuhlangabezana nezidingo.
isifinyezo:
1. Ukuze uthole amapeni e-plug-in angathathi hlangothi nawe-ballpoint, ukulingana phakathi kwekepisi nomgqomo kuyadingeka ukuze kube okulingene. Ngokuvamile, bamba ipeni ngesandla esisodwa, phusha ikepisi ngesithupha sakho, bese usiphushela ngaphandle. Uma kungenjalo, kubhekwa njengokulingana okuqinile.
2. Emapeni ane-back seal emgqonyeni wepeni, kuyadingeka ukuthi isigxivizo sangemuva singakhishwa kalula ukuze izingane zingazigwinyi ngephutha. Ukuhlolwa kwe-BS7272 kuyadingeka, futhi indlela yokuhlola imi kanje:
a. Izidingo zokuphepha kwekepisi yepeni:
①Izimfuneko zikasayizi wekepisi lepeni: ikepisi lepeni alikwazi ukudlula kugeji ethile yokukala noma ikepisi lepeni alikwazi ukudlula esikalini sokukala okungenani esingu-5mm. Ububanzi begeji yeringi yi-16mm futhi ukujiya okungenani ku-19mm;
②Izimfuneko zendawo yokufaka umoya yesivalo sepeni: okungenani 6.8m ㎡, uma kuyimbobo eyodwa, idinga u-3.4 m ㎡;
③Izidingo zokugeleza komoya wekhephu yepeni: okungenani 8L/Min ku-1.33KPa.
b. Izidingo zengemuva lepeni:
① Izidingo zosayizi wepulaki yangemuva: ipulaki yangemuva ayikwazi ukudlula kugeji ethize yokukala, ububanzi begeji yokukala ngu-16mm, futhi ukujiya okungenani kungu-19mm;
② Ipulaki yangemuva iphuma ekugcineni kwepeni, futhi ipulaki yangemuva kufanele imelane namandla amancane angu-50N;
③ Ipulaki yangemuva ihlehle ngokuphelele ekugcineni kwepeni futhi kufanele imelane namandla amancane angu-10N;
④ Izimfuneko zobukhulu obuncane bomkhawulo wesiphetho sepulaki engemuva: ubude bengxenye engabanjwa akumele budlule u-1MM, futhi ubude bubonke akumele budlule u-3MM;
⑤ Izimfuneko zesilinganiso sokugeleza komoya sepulaki engemuva: ku-1.33KPa, okungenani kuhlangatshezwana nayo okungenani i-8L/Min, futhi ipulaki elingemuva kufanele limelane namandla aphansi angu-10N.
3. Ngamapeni aneziqeshana, ukuhlolwa kokunwebeka kwesiqeshana kufanele kwenziwe. Kudingeka ukuthi ukwazi ukubamba izingcezu ezintathu zephepha elingu-80g A4. Ngesikhathi esifanayo, isiqeshana kufanele sibe nokunwebeka okuhle. Ngokuvamile, kuhle ukuyifefa ngeminwe yakho izikhathi ezingu-3-5 ngaphandle kokuphuka.
4. Uma umphongolo wepeni usenayo iphethini yokuphrinta umbala, yenza ukuhlolwa kokunamathela okungu-3M (namathisela itheyiphu engu-3M ephethinini okungenani umzuzu ongu-1, bese uklebhula itheyipu ku-45°, kanye nendawo ecwecwayo kasilika. isikrini singaphansi kuka-5%.
stapler
A. Ukucaciswa kwe-Stapler kungahlukaniswa ngezigaba ezine:
8 gauge stapler, 10 gauge stapler, 12 gauge stapler kanye neply stapler obukhulu.
B. Impilo yesevisi ye-stapler ngokuvamile izikhathi ezingu-20,000.
C. Imisebenzi nezimfuneko:
1. Izingxenye ezisele kufanele zibambisane ngokuguquguqukayo. Lapho ubethelwa, i-nail pusher kufanele ihambe kahle endleleni yezipikili futhi ikwazi ukusetha kabusha ngesikhathi. Ishidi lokucindezela eliyisisekelo lingaphusha i-stapler liphume ngalinye ngalinye bese lisigoba emseleni wezinzipho, futhi lingashayela ngempumelelo zonke izinto eziyisisekelo endleleni yezinzipho.
2. Indawo yangaphandle yefilimu kapende ye-stapler kufanele ibe isicaba, ibe nombala ofanayo ngokuyisisekelo, kungabikho ukungcola kwezinhlayiyana, kungabikho amabhamuza asobala we-pinhole, ukuxebuka kopende nezinye izenzakalo.
3. Ubuso be-stapler coating akufanele bube mnyama, imigodi, iphuzi kanye nezinye iziphambeko, futhi akufanele kube ne-oxidation engathi sína uma kungeyona eyinhloko.
4. I-stapler nail plate kanye ne-nail groove engezansi kufanele ihlolwe ukuqina.
Isifinyezo sezinye izinto zokubhala:
1. Amapeni nezimpawu ze-Watercolor:
① Faka amandla angu-2KG ku-nib ukuze ubone ukuthi i-nib iboshiwe yini.
② Donsa ichopho lepeni ngamandla angu-1KG, bese ubheka ukuthi umgogodla wepeni uyakhishwa yini phakathi kwemizuzwana eyi-10.
2. Inhlanganisela yebhodi elimhlophe nozibuthe: Shaya ibhodi elimhlophe ngamandla angu-1KG ukuze ubone ukuthi umazibuthe uyawa yini.
3. Ikhrayoni: Uma ubhala nge-engeli engama-degree angu-45 ngamandla angaphansi kuka-1.5 kg, bheka ukuthi liyaphuka yini.
Isikhathi sokuthumela: Dec-14-2022